BP25-005 thru bp25-10 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 25a high current silicon bridge rectifiers BP25-005 thru bp25-10 features z current rating 25a z reverse voltage rating up to 1000v z typical ir less than 1 a z high temperature soldering guaranteed: 260 c /10 seconds mechanical data z case: metal heat sink ca se, electrically insulated z terminals: universal .25? (6.3mm) fast on dimensions in inches and (millimeters) z mounting method: bolt down on heat sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency z weight: 20 grams dim min max remark h* 0.295(7.5) 0.311(7.9) suffix ?s? thin case i* 0.74(18.80) 0.84(21.30) suffix ?s? thin case l* 1.09(27.89) - suffix ?s? thin case maximum ratings and electrical c haracteristics, ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol BP25-005 bp25-01 bp25- 02 bp25-04 bp25-06 bp25-08 bp25-10 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current at tc=55 c i o 25.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 300 a storage temperature range t stg - 55 to + 175 c operating temperature range t op - 55 to + 175 c electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol BP25-005 bp25-01 bp25-02 bp25-04 bp25-06 bp25-08 bp25-10 units maximum instantaneous forward voltage per bridge element at specified current v f 1.1 v maximum reverse dc current at rated dc blocking voltage per element i r 10 a note: suffix no. versus different cases and terminals case suffix no terminal normal metal case thin metal case normal plastic case aluminum base thin plastic case aluminum base fast on terminals no suffix s p ps wire lead terminals w ws pw pws in line pin configuration l ls 1.13(28.7) 1.12(28.4) 0.469(11.90) 0.429(10.90) 0.752(19.10) 0.673(17.10) l* 1.200 (30.5) min 0.042(1.07) 0.038(0.97) h* 0.442(11.23) 0.432 ( 10.97 ) 0.094 (2.4) diam i* 1.00(25.40) 0.90(22.86) 0.25 (6.35) 0.565(14.35) 0.525(13.35) 1.13(28.7) 1.12(28.4) 0.657(16.7) 0.618(15.7) 0.652 (16.6) 0.728(18.5) 0.689 ( 17.5 ) hole for no.10 screw 0.2 (5.08)diam. h* 0.442(11.23) 0.432(10.97) hole for no.10 screw 0.2 (5.08)diam.
BP25-005 thru bp25-10 page: 2 fig. 2 - typical reverse characteristics at t j =25 10 1.0 0.1 .01 instantaneous reverse current, microamperes 0 20 40 60 80 100 120 140 percent or rated peak reverse voltage 1 1.5 2 3 4 5 6 7 8910 15 20 30 40 50 70100 fig. 5 - typical junction capacitance per bridge element 500 400 300 250 200 150 100 60 capacitance, c.j. pf reverse voltage, volts t j =25 f=1mh z vsig=50m vp-p ratings and characteristic curves BP25-005 thru bp25-10 1000 500 100 50 10 5 1.0 0.1 fig. 3 - typical instantaneous forward characteristics instantaneous forward current, amperes 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 instantaneous forward voltage, volts t j =25 300us pulse width 1% duty cycle bp25-l in line pin configuration (plastic case) t j = 175 1.5mm) copper ac 11.23 .432 10.97 .140 3.6 .120 3.05 .040 28.7 1.12 13.9
|
